Aluminium & glass · Delhi NCR · Since 1992
Aluminium & glass fabrication for homes and buildings across Delhi NCR
We measure at your site, cut and assemble in our own workshop off Dilshad Garden, and our own men fit it. One team from the first visit to handover.
- Established 1992
- GST registered
- TrustSEAL verified on IndiaMART
- Private limited company
- Homeowners, offices, builders, architects
Eleven trades, one team, one bill
Ranges are per sq ft for supply and fitting, before GST. Where you land inside a range depends on glass thickness, section weight, finish and working height, which is why we measure before quoting.
A low quote on the phone means nothing. What you feel in year five is the section weight, the hardware and the sealing.
The man who measures your opening is there when it goes in. Nothing gets handed to a third-party contractor halfway through.
Drain holes in the bottom track, EPDM gaskets instead of loose beading, interlocks that actually meet. That is what keeps water off your sill in July and dust out in May.
A written per sq ft figure once we have measured. Change the glass or the finish and you hear the new number before we cut, not on the final bill.
Floors covered, cut-offs carried out, every shutter and lock tested with you standing there. Small thing, and people remember it.
Recent work
Ask for photos of work near you and we will send a set on WhatsApp.
Enquiry to handover in four steps
No advance until the measurement is done and the rate is with you in writing.
Enquiry
Call or WhatsApp. A photo of the opening with rough sizes is enough for a ballpark rate the same day.
Site measurement
Free, anywhere in NCR. We check the opening, the plaster line and the fixing surface, then send a written rate.
Fabrication
Cut and assembled at our workshop off Dilshad Garden. Most window and door jobs take 7 to 12 working days.
Installation
Fitted, sealed and cleaned by our team. You test every shutter and lock before the balance is paid.
Indicative ranges
What things cost, roughly
Working ranges for supply and fitting, before GST. Small jobs work out a little dearer per sq ft than large ones, and there is usually a minimum area. Send sizes and you get a firm figure.
Ask for a firm rate →All figures ₹ per sq ft, before GST.
Where we work
All of Delhi NCR, out of Dilshad Garden
East Delhi, Shahdara and Ghaziabad are on our doorstep, so measurement there is usually same-day. For Gurugram, Faridabad and Greater Noida we fix the visit a day ahead and carry the full sample kit.
“Prompt Response and Excellent Service at Best prices.”
“Good.”
Other verified jobs rated by customers
What customers ask before ordering
How much do aluminium windows cost per sq ft in Delhi?
Hinged work starts around ₹425 per sq ft and a double-glazed sliding runs to about ₹750. The spread comes from glass thickness, section weight and finish. You get the firm figure in writing after we measure.
How long does fabrication and fitting take?
Most window and door jobs take 7 to 12 working days from confirmation. Cladding and structural glazing depend on scaffolding and site access, so we commit to a date after the site visit.
Sliding or openable windows for a flat on a main road?
For traffic noise a double-glazed sliding on a good track handles most of it. A casement shuts tighter, so on a very noisy road we suggest casement with double glazing on the road-facing side and sliding elsewhere.
What stops water coming in during the monsoon?
Water gets in through blocked drain holes, loose beading and a poor silicone line at the outer joint. We drill proper weep holes, use EPDM gaskets and seal the outside edge, then check the frame with water before handover.
Do you work in Gurugram and Noida?
Yes, all of Delhi NCR: Delhi, Gurugram, Noida, Greater Noida, Ghaziabad and Faridabad. East Delhi and Ghaziabad are next to the workshop so measurement there is often same-day.
Get a quote
Send the sizes. We will come and measure.
Measurement is free and there is nothing to sign after it. If you already have a drawing or a BOQ, send it across and we will price against it line by line.